Menu Close

Okidata 4410 user manual

Enter the characters you see below Sorry, we just need to make sure you’re not a robot. Oki Microline 4410 User Manual High speed forms printer. Printer Oki Pacemark PM4410 Guía De Instalación Gu쟠de instalaci? Page 3 Note: Notes are set in regular okidata 4410 user manual and contain general information.

Cautions are set in bold italics and contain information regarding actions which could potentially cause personal injury or damage to the printer. Important information is set in italics. Page 11 When you first start up your printer, both CFG1 and CFG2 are set to the same settings as the factory settings. Page 12 The new CFG designation appears on the second line of the display. You can reset the menu to the original factory settings, or engage one of the user-set values—CFG1 or CFG2—as the default. Page 13 Line Spacing Form Tear-Off Skip Over Perf. Page Width Page Length Settings IBM-PPR, EPS-FX, OKI-ML Utility, NLQ Courier, NLQ Gothic, HSD 10 CPI, 12 CPI, 15 CPI, 17.

Page 14 Group Item Front Feed Line Spacing Form Tear-Off Skip Over Perf. Page 17 Change to 7 Bits if your system uses a 7-bit data format. Auto CR If you want the printer to automatically add a carriage return when a Line Feed is received at the end of a line, change the setting to Yes. Page 18 Form Tear-Off Select 500 ms, 1 second, or 2 seconds to turn the Form Tear-Off feature on and to set the time interval for the printer to wait before advancing the paper to the tear-off position.