Menu Close

Binatone 3525 user manual

Binatone e900 System User Manual With caller display. 1, Oct, 04 please read these instructions carefully. The Binatone Help Line is binatone 3525 user manual from 9.

Page 6: Read These Notes First The e900 charger pod must be used with mains adapter, supplied with the unit. Using any other adapter will result in non-compliance with EN60950, and will invalidate any approval given to this apparatus. Page 8 Color profile: Generic CMYK printer profile Composite Default screen Fit a battery pack in each handset A. Page 9: Before You Start Color profile: Generic CMYK printer profile Composite Default screen Before you start Electrical DO NOT let the base unit or charger pod get wet. Electrical equipment can cause serious injury if used while you are wet or standing in water. Page 10: Switching On And Off Remember that it may take a few moments for the handset to re-establish a radio link with the base unit. C button to clear digits one by one from the display.

Page 13: Memory Dialling Color profile: Generic CMYK printer profile Composite Default screen Memory dialling You can store up to 20 phone numbers in memory. Each number can have up to 24 digits. The 20 memory locations are numbered 01 to 20. Page 15 Color profile: Generic CMYK printer profile Composite Default screen Memory dialling To use the You can store a number in memory while you notebook are busy on a call.

Page 17: Caller Display Color profile: Generic CMYK printer profile Composite Default screen Caller Display If you subscribe to this feature from your service provider, you can see the phone numbers of your callers on the display, before you answer. Page 19 Color profile: Generic CMYK printer profile Composite Default screen Using a multi-handset system If you have an e900 multi-handset system, you already have up to six handsets registered to your base unit. You can register additional handsets — altogether, up to six handsets per base unit. Page 20 If the user hasn’t answered after 30 seconds, the outside call will come back to you and your handset will ring. Page 22 Handsets ring for up to 30 seconds. Each handset can be registered to up to four base units, numbered 1 to 4.

Page 24 Base units are numbered 1 to 4. If you select 0, your handset will automatically select the base unit that gives the strongest connection. If you need to enter a PIN code for the base unit, refer to the base unit’s User Guide. If you have problems, contact the Binatone Help Line for more advice. With the volume set to 0, the handset will not ring for an incoming call, but the display will show call or the phone number.

Page 28 1 for Direct Call on Press the PHONE button to confirm While Direct Call is turned on, the display shows the Direct Call number. You can answer calls as normal. Page 29 Color profile: Generic CMYK printer profile Composite Default screen Customising your handset To clear all This is a way of clearing all stored numbers at memories once, from the memory locations and the Last Number Redial memories. If you have set a Direct Call number, it will be cleared too. With the volume set to 0, the base unit will not ring for an incoming call. Page 35: Indirect Network Color profile: Generic CMYK printer profile Composite Default screen Indirect Network You can use this feature if you make some of your calls via a different network from the one that supplies your exchange line.

By using indirect access to an alternative network, you may be able to save money on long- distance and international calls. PHONE button for an outside line. Page 37: Troubleshooting Color profile: Generic CMYK printer profile Composite Default screen Troubleshooting The e900 must be serviced by trained engineers. NEVER attempt any repairs or adjustments yourself — you could make the problem worse and invalidate the Guarantee. Disconnect one or more telephones and see whether that helps. My call was cut Move the handset closer to the base unit before you try off when I went again to make a call. Now I can’t use my handset.